Real Life Incident: Ship Accommodation Ladders With Improvised Secondary Means Of Support

The Australian Maritime Safety Authority (AMSA) notes that, although there are no requirements under SOLAS regulation II-1/3-9 for the rigging of secondary means of support to accommodation ladders and no standards in MSC. 1/Circ1331 for the construction, maintenance and operational testing of those arrangements, rigging of a secondary means of support to accommodation ladders, particularly where the accommodation ladder is suspended, has become common practice in some Australian ports.

ladder and vessel structure — Image Credits: nautinst.org

AMSA has observed that secondary means of support arrangements have consisted of the following:

Steel wire, synthetic or natural fibre ropes tied or otherwise connected to the accommodation ladder and a part of the vessel’s structure
Synthetic or natural fibre rope roved through pulley blocks and connected to the accommodation ladder hoisting arrangements or part of vessel’s structure
Steel chains or wire ropes with or without a bridle connected to a part of the vessel’s structure or suspended from the vessel’s stores crane or bunker hose davit.

According to AMSA, in many cases the secondary means of support are inadequate for their intended purpose and in fact introduce unacceptable hazards and risks. The inadequacies include:

Connections to vessel’s cranes or davits with insufficient safe working limit (SWL)
Attachments to non-load-bearing parts of the accommodation ladder and vessel structure
Adequate tensile strength of ropes, wires, pulleys and fittings.
Additionally, some arrangements are not easily adjustable and add a further risk to safety when the accommodation ladder is lowered or raised to compensate for draught changes or due to tidal variation.
There are often no policies, procedures or instructions contained in the safety management system for the use and maintenance of the secondary means of support arrangements and crew have been unable to demonstrate proficiency in the use of these arrangements. AMSA has noted several incidents and accidents due to these improvised methods.

Lessons learned

If a secondary means of support is desired, a risk assessment should be undertaken on board in line with the vessel’s safety management system.
Procedures for the fitting, maintenance and operation of the secondary means of support arrangements should be included in safety management system procedures and crew should be inducted and trained in the use of these arrangements.
Good seamanship and reasonable judgement is a standard in itself.

Press Release: nautinst.org

Disclaimer :
The information contained in this website is for general information purposes only. While we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.

Do you have info to share with us ? Suggest a correction

About Author

Marine Insight News Network is a premier source for up-to-date, comprehensive, and insightful coverage of the maritime industry. Dedicated to offering the latest news, trends, and analyses in shipping, marine technology, regulations, and global maritime affairs, Marine Insight News Network prides itself on delivering accurate, engaging, and relevant information.