Home › Marine Navigation › Can Container Ships Save Up To 14% Fuel If Terminals Shared Berth Times Earlier?

Can Container Ships Save Up To 14% Fuel If Terminals Shared Berth Times Earlier?

Add Marine Insight on Google

Add Marine Insight on Google
Terminal
Image for representation purpose only

Just-in-time arrival could cut container ship fuel use by up to 14% per voyage, according to a 2022 study commissioned by the IMO-Norway GreenVoyage2050 project.

Just-in-time arrival means a ship adjusts its speed during the passage to reach port when the berth, fairway, pilots and tugs are ready. The ship burns less fuel and waits less time at anchor.

This article explains where the 14% comes from, why the savings shrink when berth information arrives late, and what terminals can do about it.

Just-in-Time Arrival Replaces the Race to Port and Wait at Anchor

The IMO describes a just-in-time ship as one that burns the least bunker fuel on the way to port and still arrives on time. The IMO also notes that the port call process is generally not optimised today.

A ship that races to arrive early and then waits at anchor has burned extra fuel to reach a berth that was not yet free. Under just-in-time arrival, the ship receives a requested arrival time at the start of the passage and sails at the speed needed to meet it.

The IMO’s 2020 guide recommended starting just-in-time arrival with container ships. They face fewer contractual barriers and often run to more predictable schedules.

Whole-Voyage Speed Changes Save More Than Three Times the Last 12 Hours

MarineTraffic and Energy and Environmental Research Associates conducted the study for the Low Carbon Global Industry Alliance, a partnership under the IMO-Norway GreenVoyage2050 project. The study tested three scenarios on 2019 AIS data. Each saving below is the average per voyage.

  • Speed adjusted for the whole voyage: 14.16% fuel saving
  • Speed adjusted over the last 24 hours: 5.90%
  • Speed adjusted over the last 12 hours: 4.23%

The whole-voyage saving is more than three times the saving from the last 12 hours alone. The earlier a ship knows its berth time, the more fuel it can save.

Whole-Voyage
Average fuel saving per voyage by how early a ship adjusts its speed. Source: IMO-Norway GreenVoyage2050 Low Carbon GIA study, 2022, modelled on 2019 AIS data.

Ships Often Learn Their Berth Time Only 2 Hours Before the Pilot Boards

A 2020 exercise by the Port of Rotterdam, Maersk, MSC and the IMO analysed 26 ships calling at one terminal. The IMO noted that ships often receive their berth time only about two hours before the pilot boards.

The study’s smallest scenario assumed a ship could adjust its speed for the final 12 hours of the voyage. Ships often learn their berth time much later than that. With only two hours left before the pilot boards, a ship has little time to slow down enough to save meaningful fuel.

Berth
Main causes of anchoring in the 2021 Valencia case study. Other causes (18.5%) are calculated as the remainder. Source: UNCTAD Transport and Trade Facilitation Newsletter No. 96, 22 September 2022.

A 2021 case study of the port of Valencia, published in UNCTAD’s transport newsletter, covered 5,793 port calls. Anchoring occurred in 26.6% of container ship calls. Across all ship types, the terminal not being ready caused 48% of anchorages. In another 33.5% of anchorages, the ship arrived on a different date from the one planned for its berthing.

Anchorage
Main causes of anchoring in the 2021 Valencia case study. Other causes (18.5%) are calculated as the remainder. Source: UNCTAD Transport and Trade Facilitation Newsletter No. 96, 22 September 2022.

Fuel savings at sea therefore depend on the terminal knowing when its berth will be ready and telling the ship early.

Charter Clauses and Port Data Gaps Hold Back Adoption

The IMO’s just-in-time portal lists the main barriers. One is contractual. Under a voyage charter, the master must proceed with utmost despatch, meaning as fast as possible to port, even when no berth is free. Slowing down to arrive just in time can conflict with that duty. The portal suggests charter clauses on virtual arrival and cost sharing as one fix.

Data barriers include inaccurate timestamps, port definitions that are not aligned with global standards, and port systems that do not exchange data directly with each other. The portal also says that those who supply critical data need an incentive to do so.

Earlier Berth Data Gives Ships More Time to Save Fuel

Terminals can close the gap with tools that track inbound ships and update berth plans as arrival times change. UNCTAD’s 2025 maritime review urged ports to invest in digital systems such as port community platforms to cut costs and delays.

A simple example shows how earlier berth data changes the result.

Two container ships head for the same terminal with the same planned arrival.

Ship A receives a berth window at departure, so the master can lower speed gradually over the whole passage.

Ship B receives its berth time only about two hours before the pilot boards, the delay noted in the Rotterdam exercise. By then Ship B has little room left to change speed.

The IMO-Norway study put the average saving at up to 14.16% per voyage when speed is adjusted for the whole voyage, and 4.23% when only the last 12 hours are used. Two hours of notice would likely leave a smaller saving than either.

berth data
Illustrative example of Ship A and Ship B, same terminal and planned arrival, with different notice of the berth time. The savings are the study’s modelled averages, not results for any named ship.

Infyz is one provider of this kind of software. The company states that its iTOMS terminal operating system includes a vessel tracking agent for real-time ship position and arrival information. It also includes a berth planning agent that automates berth and crane allocation based on vessel size and equipment availability. Infyz reports that iTOMS has cut vessel turnaround time by 10-15%.

Other terminal operating system vendors and port community platforms also offer ways to share berth and arrival data. Terminals choose between them based on cargo mix, equipment and the systems already in use.

EU Carbon Rules Make Fuel Savings Count for More in 2026

Shipping companies now pay for the emissions their ships produce in European waters. Underthe EU Emissions Trading System (EU ETS), a company must buy emission allowances and hand them over to the EU to cover its ships’ emissions.

The scheme is being phased in. Companies had to cover 40% of their 2024 emissions and 70% of their 2025 emissions. From 2026, they must cover 100%, with the first full handover due in 2027.

The rules apply to ships of 5,000 gross tonnage and above. All emissions on voyages within the European Economic Area, and while ships are in its ports, are covered. For voyages that start or end outside the area, 50% of emissions are covered.

Less fuel burnt on a covered voyage means fewer emissions to cover and fewer allowances to buy.

Just in Time Arrival Depends on Early Berth Times

As noted earlier, the modelled saving of up to 14% falls to about 4% when speed is adjusted only in the last 12 hours. Terminals that share berth times earlier give ships more time to save fuel.

In March 2026, the International Association of Ports and Harbors and the International Harbour Masters’ Association launched a Port Call Optimization Guide at the IMO’s Facilitation Committee. The guide supports standardised electronic sharing of nautical and operational data. How many ports adopt it is the next development to watch.

Infyz provides AI and cloud-enabled software for ports, shipping and logistics operations, including digital berth planning and optimization solutions. For enquiries about terminal operations software, visit infyz.com

Disclaimer :
The information on this website is for general purposes only. While efforts are made to ensure accuracy, we make no warranties of any kind regarding completeness, reliability, or suitability. Any reliance you place on such information is at your own risk. We are not liable for any loss or damage arising from the use of this website.

About Author

Founded in 2007 and headquartered in Hyderabad, India, Infyz Solutions is a premier technology company specialising in cloud-native and AI-enabled software solutions for the ports, shipping, and logistics industries….Read More ->

Disclaimer :
The information on this website is for general purposes only. While efforts are made to ensure accuracy, we make no warranties of any kind regarding completeness, reliability, or suitability. Any reliance you place on such information is at your own risk. We are not liable for any loss or damage arising from the use of this website.

Subscribe To Our Daily Newsletter

    By subscribing, you agree to our Privacy Policy  you can unsubscribe anytime.