Successful Testing Of An HT-PEM Fuel Cell System Using Methanol Paves The Way For Scale-Up At The Alfa Laval Test & Training Centre

In Q2 of 2022, Alfa Laval started up a small-scale methanol fuel cell system at the Alfa Laval Test & Training Centre. Based on positive test results, the project is on track for a 200 kW installation. Ultimately, it will provide the marine industry with a scalable energy supply that does not involve combustion.

Fuel cell system development is proceeding as planned
Alfa Laval is the driving force in a marine fuel cell development project funded by Danish EUDP (Energy Technology Development and Demonstration Program). The project’s aim is an efficient and cost-effective energy solution based on high-temperature proton exchange membrane (HT-PEM) fuel cells. In the first step, a 10 kW (2 x 5 kW) installation has been running at the Alfa Laval Test & Training Centre since July.

“We are pleased with the progress in the HT-PEM fuel cell system project,” says Alfa Laval’s Jeroen van Riel, Business Development Manager, Marine Energy Solutions. “Although this first installation is small, it allows us to test the basic setup and the function of the supporting equipment. The data compiled so far is very promising, which suggests that we can move into the next stage as planned.”

Alfa Laval Test & Training Centre
Alfa Laval Test & Training Centre

Scalable power without fuel combustion
The fuel cell system in development, which will provide clean operation with no particulate emissions, uses carbon-neutral renewable methanol. It comprises modules of HT-PEM fuel cell stacks that can be combined in racks of 200 kW, creating a standardized, scalable system for many megawatts of power. Alfa Laval is responsible for the overall system infrastructure, as well as the distribution systems needed to support the fuel cells.

Jeroen van Riel
Jeroen van Riel, Business Development Manager, Marine Energy Solutions

In the current phase of testing, two modules containing one fuel cell stack each are being run with the distribution systems. The operational data will then be used to fine-tune the 200 kW module and rack setup.

“The project will lead to an integrated, safe and marine-certified product for application on tomorrow’s green ships,” says van Riel . “Within the near future, it will offer a realistic alternative to combustion-based auxiliary power on board.”

Press Release

Disclaimer :
The information contained in this website is for general information purposes only. While we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.

Do you have info to share with us ? Suggest a correction

About Author

Marine Insight News Network is a premier source for up-to-date, comprehensive, and insightful coverage of the maritime industry. Dedicated to offering the latest news, trends, and analyses in shipping, marine technology, regulations, and global maritime affairs, Marine Insight News Network prides itself on delivering accurate, engaging, and relevant information.

Subscribe To Our Newsletters

By subscribing, you agree to our Privacy Policy and may receive occasional deal communications; you can unsubscribe anytime.

Web Stories

Leave a Reply

Your email address will not be published. Required fields are marked *