What is a Brace or Strut for Marine Engines?

2 stroke marine engines are considered to be the world most powerful engines used on ships, some of them capable of producing power of 108, 920 horses. However, while running lots of engine vibration is produced. Engine vibrations can be extremely harmful to the engine and thus must be encountered immediately to avoid damage to the machinery, ship’s hull, and strengthening members.

In order to reduce such vibrations, different methods and systems are used, which includes de-tuners, thrust pads, chokes etc. Another method to transfer engine vibration to ship’s hull is to use struts or bracings.

Marine Engines

Effects of Vibration

Vibration is naturally present in every mechanical machine because of the internal moving parts of the machine. In ship’s main engine, the internal parts are producing tremendous power by fuel combustion which produces vibration.

If the vibration level or amplitude increases more than normal, then following will result:

  •  Cracks in attached piping.
  • Fretting in the engine structure joints (between A frame and entablature).
  • Loosen of engine chocks and holding down bolts.
  • Damage in the intermediate shaft, its bearing or bearing support structure.
  • Damage to the thrust bearing.

Engine Struts and Bracing

Engine strut or brace are stud like structure usually incorporated with hydraulic or mechanical systems to transmit engine vibration to ship’s hull.

Engine strut

One end is fitted at the upper part of the main engine and other end is attached at very stiff location in the ship’s hull. This strut or brace acts as a de-tuner which increases the natural frequency of the system, so that resonance occurs above the engine rotational speed.

Frictional type Bracing or Strut

Friction type strut is one of the common types used for 2 stroke slow speed marine engines.

Frictional type Bracing

The working of these type of struts depends upon the friction between the pads that brace the engine at the top so that the resonances with critical orders are above the speed range of the engine.

There is a frictional grip which is responsible for the main functioning of the struts, which are hydraulically tightened.

Last but not the least, the tension on the hydraulic bolts must be regularly checked along with the inspection of the structure for any cracking especially around the welds.

You may also like to read-Jack Bolts for Marine Engine and the Procedure for Tensioning 

Image Credits: 

blogspot

flickr

 

Do you have info to share with us ? Suggest a correction

Article Footer Banner
Article Footer Banner

Subscribe To Our Newsletters

By subscribing, you agree to our Privacy Policy and may receive occasional deal communications; you can unsubscribe anytime.

Web Stories

3 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *